Vicon FANEX 804
The hay making tedder
Compact tedder - ideal for hay making
Highlights
CompactLine gearbox - low maintenance Standard vibration dampers and strong central unit 500mm rotor plate diameter Double bearings from pinion to crown wheel Easy 3-step adjustment of spreading angleDescription
Fanex 804, with 8.05m working width, is purpose built for hay making. It comes with a strong package of features such as standard vibration dampers, strong V-shaped central unit and central adjustment for border tedding. It offers considerable operation capabilities with the combination of 8 rotors and 8.05m working width. The small rotors are specifically designed for optimized performance while producing dry hay.
Highlights
- Low maintenance CompactLine gearbox with only one grease nipple.
- Compact tedder with low weight and power requirements.
- Standard fitted with vibration dampers and strong central unit.
- HexaLink driveline ensures compact folding.
- Rotor plate dimension of 500mm
- Double bearings from pinion to crown wheel guarantee maximum longevity of the driveline.
- Easy setting of spreading angle through simple three-way adjustment of wheel height.
- Optional headland kit for easy lifting on headlands
Features
Fanex 804 with Compact Transport Width
- Despite its´8.00m working width the Fanex 804 will fold into a very compact unit for transport, and will go below 3.00m transport width.
- The two outer rotors are fitted with the new Vicon HexaLink finger clutch, a simple yet efficient drive system that permits these rotors to turn into a 180⁰ position for transport. The remaining rotors are driven by double universals joint, providing sturdy and efficient transfer of power.
Simple three-way adjustment of wheel height, allows the optimum spreading angle to be achieved according to crop conditions.
- High-quality forage allows the optimum spreading angle to be achieved according to crop conditions, helping you to produce high quality forage.
- Setting the rotors to the right spreading angle will considerably improve the spreading action, and speed up the drying process.
- The mower swaths are neatly lifted by the tines and evenly spread over the full width.
- Tines glide in a more uniform frequency over the stubble, so the risk of dirt being lifted by the tines is minimized.
- Box shaped main frame with only one welding seam for maximum rigidity.
- The frame design is fully enclosed at the top edge for maximum strength – an exceptionally solid design,
- Double universal joints give smooth and efficient transfer of power.
- Greasable pivoting points with large diameter guarantee a very strong and reliable construction.
- Vicon oscillation dampers ensure excellent ground contour following and tedder flotation.
- The construction of the oscillation dampers results in a smooth and even distribution of the grass, thanks to the constant tine distance from the ground.
- Widely spaced mounting points - no risk of ‘hunting’.
- Excellent running characteristics.
- Low-positioned linkage on the headstock, for more effective damping action during transport.
- No risk of the tedder running under the tractor on downhill work, excellent tedding at all times through constant tine spacing to the ground.
With the optional reduction gearbox it is possible to place night swaths.
The rotors will run at reduced rpm to place the crop into smaller swaths
Technical specifications
Technical specifications
Download brochure| Model Fanex CompactLine | 804 | |
|---|---|---|
| Working width (m/ft) | 8.05 / (26’5”) | |
| Number of rotors | 8 | |
| Number of tines/rotor | 5 | |
| Transport width (m/ft) | 2.90 / (9’6”) | |
| Transport length (m/ft) | 1.90 / (6’23”) | |
| Storage height (m/ft) | 3.15 / (10’33”) | |
| Capacity theor. (ha/h) | 6.4 |
Technical specifications
Technical specifications
Download brochureWorking Width |
Rotors/Tines |
Weight |
|
Fanex 604 |
6.05m |
6/5 |
677kg |
Fanex 804 |
8.05m |
8/5 |
950kg |